This article mainly introduces:

Norway hydraulic cylinder,supporting cylinder manufacturer,supporting cylinder

(Norway supporting cylinder,produced by Hebei Hengyu company）

supporting cylinder are widely used in Norway，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed supporting cylinder for customers from Norway.

Introduction to supporting cylinder:

The meaning of the supporting cylinder model marked by the supporting cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the supporting cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the supporting cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

When installing the piston rod, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the supporting cylinder head adn the earring (or the middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent the phenomenon of rigid interference and causing unnecessary damage.

The supporting cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

Disassembly supporting cylinder: When disassembly supporting cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the supporting cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the supporting cylinder.

Answers to some questions about supporting cylinder:

Loader arm fell badly, how to know which oil cylinder is leaking?
No matter which cylinder leakage the arm will drop, it is best to replace the oil seal, even if one cylinder is good, it will not last long, and it will drop the arm, so the two cylinders should be replaced at once.

Are hydraulic cylinders divided into oil cylinders and water cylinders? What's the difference between the two types?
There are oil cylinders and water cylinders. The two cylinders are used in different environments. Oil cylinders are generally used in places where there is less demand for media, which is our most common hydraulic cylinders. Water cylinders are mainly used for large tonnage presses. Because the equipment is too large, the use of hydraulic oil will cause a relatively large waste. However, water is not pure water, there are oil-in-water emulsion and water-in-oil emulsion. Water has another benefit: it's flame retardant. It is especially suitable for some flammable and explosive occasions. Or with water glycol. The use of pure water is very little, mainly because the seal is not good and easy to rust.