This article mainly introduces:

Uzbekistan hydraulic cylinder,large hydraulic cylinder manufacturer,large hydraulic cylinder

(Uzbekistan large hydraulic cylinder,produced by Hebei Hengyu company）

large hydraulic cylinder are widely used in Uzbekistan，because of powerful torque，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed large hydraulic cylinder for customers from Uzbekistan.

Introduction to large hydraulic cylinder:

When the large hydraulic cylinder is installed, the piston and the large hydraulic cylinder head and other parts have large mass, large size and large inertia, even if there is a lifting equipment auxiliary installation, because the specified clearance is small, no matter how hard it will be put into, therefore, the end of the piston or the large hydraulic cylinder head boss is easy to cause scars when it hits the inner surface of the large hydraulic cylinder wall. The solution to this problem: for a large number of small products, the use of autocratic assembly oriented tools during installation; For heavy, thick and large large and medium-sized large hydraulic cylinders, only careful and careful operation can be avoided.

Before purchasing the large hydraulic cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

The large hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy and does linear reciprocating motion (or swinging motion). It is simple in structure and reliable in operation. When it is used to achieve reciprocating movement, the deceleration device can be eliminated, and there is no transmission gap, and the movement is smooth, so it is widely used in various mechanical hydraulic systems. The output force of the large hydraulic cylinder is proportional to the effective area of the piston and the pressure difference between the two sides; The large hydraulic cylinder is basically composed of large hydraulic cylinder and large hydraulic cylinder head, piston and piston rod, sealing device, buffer device and exhaust device. Buffer device and exhaust device depending on the specific application, other devices are essential.

When the oil pressure of the large hydraulic cylinder inlet is too low to reach the specified value, the leakage situation of the relevant oil system should be checked and the leakage should be eliminated; Check the piston and piston rod seal ring for damage, aging, loose and other phenomena; Check whether the hydraulic pump and pressure valve are faulty.

Answers to some questions about large hydraulic cylinder:

The hydraulic cylinder is slow when moving forward and faster when moving back.
If the cylinder is single, it is slow when it is moving forward without the rod cavity, and fast when it is shrinking.

What is a two-way hydraulic cylinder?
Bidirectional hydraulic cylinder definition: The bidirectional hydraulic cylinder uses the oil as the working medium, transmits the movement through the change of the sealing volume, and transmits the power through the pressure inside the oil. The two-way cylinder has at least two oil ports, which are used to connect the hydraulic tubing, and control the extension and retraction of the cylinder by pressing.