This article mainly introduces:

Jordan hydraulic cylinder,hydraulic steering cylinder manufacturer,hydraulic steering cylinder

(Jordan hydraulic steering cylinder,produced by Hengyu Group）

hydraulic steering cylinder are widely used in Jordan，because of powerful torque，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed hydraulic steering cylinder for customers from Jordan.

Introduction to hydraulic steering cylinder:

How to repair the hydraulic steering cylinder body when it is damaged: When the hydraulic steering cylinder has trace deformation and shallow tensile marks, the hydraulic steering cylinder is repaired by strong honing process. The heavy honing process can repair hydraulic steering cylinders up to 2.5 times out of tolerance than the original tolerance. It honed the parts with excessive size or shape error through a powerful honing machine, so that the overall size, shape tolerance and roughness of the hydraulic steering cylinder can meet the technical requirements.

When the hydraulic steering cylinder is installed on the main engine, the oil port piping part and the guide sleeve should be checked for oil leakage in the running test, and the earring and the middle hinge shaft bearing should be refueled.

Before the hydraulic steering cylinder is removed, the system should be unloaded, the loop pressure is zero, the oil source should be cut off, and the oil port should be blocked after the oil port distribution pipe is loosened.

In order to ensure the service life of the hydraulic steering cylinder, the medium used must not be mixed with impurities and stolen goods, so as to avoid scratching the inner arm of the hydraulic steering cylinder, causing damage to the seal and causing leakage in the hydraulic steering cylinder. It is required that the filtration accuracy of the system is not less than 80μm, the oil pollution is strictly controlled, the hydraulic oil is kept clean, the performance of the hydraulic oil is regularly checked, and the necessary fine filtration or replacement of the new working hydraulic oil is carried out.

Answers to some questions about hydraulic steering cylinder:

Why does the hydraulic cylinder go up to the top and then slowly go down?
Leakage in the cylinder or the hydraulic valve that controls the cylinder, can be replaced and removed. Or add a pressure retaining valve to the hydraulic system to ensure pressure.

What are the cylinder manufacturing processes?
Hydraulic cylinder processing process: 1, cylinder: a, material preparation (seamless steel pipe) → inspection (material certificate, etc.) → tempering (outsourcing: Some parts) → car (car round, shelf mouth, boring, flange stop, etc.) → tempered hardness test → welding (welded pipe joint base, flange and other accessories) → boring or honing (rough boring, fine boring, rolling) → car (hole slot or internal and external thread) → fitter (drilling) → inspection → rust prevention storage b, material preparation (forgings) → inspection (material certificate, inspection, etc.) → welding (blank butt welding) → welding inspection → car (rough car) → quality control (outsourcing: some parts) → car (car round, shelf mouth, boring stop, flange stop, etc.)