This article mainly introduces:

Belgium hydraulic cylinder,large long cylinder manufacturer,large long cylinder

(Belgium large long cylinder,produced by Hengyu Hydraulic Cylinder Factory）

large long cylinder are widely used in Belgium，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed large long cylinder for customers from Belgium.

Introduction to large long cylinder:

We can not just consider the price and ignore the quality when we purchase the large long cylinders. Now some manufacturers produce unqualified products in order to reduce costs, the piston rod is not adjusted, the rod coating is not enough, the large long cylinder finish can not reach, the guide sleeve should use copper, but instead of ductile iron, although the cost is reduced, the quality of the large long cylinder is not required.

The material, shape and compression of the large long cylinder seal have a great impact on the service life and work efficiency of the large long cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.

large long cylinder daily maintenance, should focus on checking whether the piston rod surface roughness and shape and position tolerance meet the technical requirements, if the piston rod bending should be calibrated to meet the requirements or according to the physical mapping, manufactured by a professional manufacturer. If the piston rod surface coating wear, slip damage, local spalling can be adopted to remove the coating, re-chrome surface processing process.

large long cylinder head explanation: low pressure castings, medium and low pressure with HT300 gray iron, medium and high pressure with 35, 45 steel. When the large long cylinder head itself is the guide sleeve of the piston rod, the large long cylinder head is best cast iron. At the same time, brass, bronze or other wear-resistant materials should be fused on the guide surface. If the guide sleeve is pressed into the large long cylinder head, the guide sleeve shall be wear-resistant cast iron, bronze or brass.

Answers to some questions about large long cylinder:

How to deal with hydraulic cylinder inner wall rag, local wear serious or corrosion?
It can be reparied if the inner wall of the hydraulic cylinder is frayed, local wear or corrosion. We can use the inner wall cold melting copper technology, it has the following advantages: first, the temperature is low, the operating temperature is less than 180 degrees, and the heat affected zone is small. Second: high hardness is up to Brinell hardness 280, wear resistance and anti-corrosion. Third: the process is mature, some large coal mills have been repaired with this method and the effect is remarkable.

What do cylinder internal leakage and external leakage mean?
Internal leakage means that the piston seal in the cylinder is not strict, there is a leak between the two chambers of the cylinder, the oil is still in the cylinder, and the external leakage is that the oil leaks to the outside of the cylinder.