This article mainly introduces:
Canada hydraulic cylinder,rack cylinder manufacturer,rack cylinder
(Canada rack cylinder,produced by Hengyu Hydraulic Co., Ltd）
rack cylinder are widely used in Canada，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed rack cylinder for customers from Canada.
The daily inspection of the rack cylinder includes: checking the connection of the rack cylinder and the pipe joint for leaks. Check the rack cylinder rod for leaks. Check the rack cylinder connection for leaks. When the rack cylinder moves, the work is normal and smooth. Whether the rack cylinder has internal leakage.
In the case of serious wear on the inner surface of the rack cylinder, or when there is a deep longitudinal tensile mark, it should be mapped according to the physical object and re-produced by the professional manufacturer according to the rack cylinder manufacturing process for replacement. The rack cylinder can also be repaired with TS311 antiwear repair agent. TS311 anti-wear repair agent is mainly used for the repair of worn and slipped metal parts.
The rack cylinder should be avoided for a long time without use, if it is indeed idle for a long time for some reason, it should also be regularly turned on for empty operation, so that its parts can be fully lubricated, so as to avoid rust on the working surface and affect the normal work in the future. (If it cannot be turned on and run, a small amount of lubricating oil can be applied on its outer surface for protection) ' The use of the rack cylinder should pay attention to: the operation should be as far away from the rack cylinder as possible, to avoid falling objects, knocking, rubbing the rack cylinder coating. When cleaning the rack cylinder, only use soft materials (such as cotton) to wipe, and do not scratch high-hardness materials. Do not use the rack cylinder when the oil temperature exceeds 70 ° C.
Do not enter foreign bodies when installing the rack cylinder block. The place where the installation operation is carried out, the conditions are not good, and foreign bodies can be entered unconsciously. Therefore, the installation site must be cleaned up around, especially the place where the parts are placed must be cleaned, so that there is no dirt.
How to repair if hydraulic shears cylinder oil leakage?
The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.
How to refuel pneumatic riveting cylinder?
First put the gun flat, that is, horizontally, while pushing the stroke positioning pin and loosen the back cover, rotate to the left for a maximum of five turns, and then use a wrench to loosen the oil sealing screw, slowly add the hydraulic oil and let the air out, fill up to tighten the oil sealing screw. This process of adding hydraulic oil is over.
Add Wechat