This article mainly introduces:

Croatia hydraulic cylinder,yg series hydraulic cylinder manufacturer,yg series hydraulic cylinder

(Croatia yg series hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory）

yg series hydraulic cylinder are widely used in Croatia，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed yg series hydraulic cylinder for customers from Croatia.

Introduction to yg series hydraulic cylinder:

The yg series hydraulic cylinder should be used as far as possible to avoid the transverse force, sometimes the piston rod to bear the transverse load is too large, especially do not force or pull the yg series hydraulic cylinder, bite. Elimination method: When installing the yg series hydraulic cylinder, ensure that the axis position of the yg series hydraulic cylinder is consistent with the direction of movement; Make the load borne by the yg series hydraulic cylinder as far as possible through the yg series hydraulic cylinder axis, to avoid the phenomenon of eccentricity.

yg series hydraulic cylinder installation precautions: Before installing the yg series hydraulic cylinder into the system, the parameters on the yg series hydraulic cylinder label should be compared with the parameters when ordering. The base of the yg series hydraulic cylinder must have sufficient stiffness, otherwise the yg series hydraulic cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.

Under normal circumstances, the yg series hydraulic cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the yg series hydraulic cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the yg series hydraulic cylinder and the end cover, the piston and the piston rod, the piston and the yg series hydraulic cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the yg series hydraulic cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.

Disassembly yg series hydraulic cylinder: When disassembly yg series hydraulic cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the yg series hydraulic cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the yg series hydraulic cylinder.

Answers to some questions about yg series hydraulic cylinder:

What are the four cylinders of the truck crane?
The four cylinders of the truck crane generally refer to the telescopic cylinder of the boom (to adjust the length of the boom), the variable amplitude cylinder of the boom (to adjust the elevation Angle of the boom), the horizontal telescopic cylinder of the support leg and the vertical cylinder of the support leg.

Why can't the hydraulic cylinder be pulled back after pushing to the limit?
May be long-term use to the limit position, resulting in serious wear caused! The solution is to add the stroke switch or disassemble and add gaskets before and after the piston.