This article mainly introduces:

Vietnam hydraulic cylinder,push plate cylinder manufacturer,push plate cylinder

(Vietnam push plate cylinder,produced by Hengyu Hydraulic Co., Ltd）

push plate cylinder are widely used in Vietnam，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed push plate cylinder for customers from Vietnam.

Introduction to push plate cylinder:

The meaning of the push plate cylinder model marked by the push plate cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the push plate cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the push plate cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

push plate cylinder piston rod material introduction: In general, we use 45 steel to produce push plate cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

Protection of the push plate cylinder surface: During the dismantling process, safety protection should be carried out on the push plate cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the push plate cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the push plate cylinder should be cleaned up in time.

The body of the push plate cylinder on the processing process requirements: the body of the push plate cylinder is an important and essential part of the push plate cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the push plate cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

Answers to some questions about push plate cylinder:

How to set up the one-way cylinder hydraulic system?
Single acting oil cylinder, that is, an oil cylinder with an oil port, can use two three-way valves to control the cylinder action. The three oil ports are respectively connected to P (oil pump), A (oil cylinder), and T (oil tank). If the oil pump is to run continuously, an electromagnetic relief valve can be added. When the cylinder is not moving, the relief valve can unload the oil pump. You can also add a three-way four-way valve, the middle function is unloaded, two outlets: A connected to the fuel tank, B connected to the cylinder.

What is the smallest cylinder size?
The smallest shape cylinder I have ever seen is a hydraulic clamping cylinder in the machine tool industry. Outer diameter 24 mm, total length 23 mm, travel 4 mm. Weighs 0.05 kg. Maximum clamping force 3500 Newtons.