This article mainly introduces:

Kazakhstan hydraulic cylinder,pile driver hydraulic cylinder manufacturer,pile driver hydraulic cylinder

(Kazakhstan pile driver hydraulic cylinder,produced by Hebei Hengyu company）

pile driver hydraulic cylinder are widely used in Kazakhstan，because of excellent temperature resistance，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed pile driver hydraulic cylinder for customers from Kazakhstan.

Introduction to pile driver hydraulic cylinder:

The internal leakage of the pile driver hydraulic cylinder is an important indicator to measure the quality of the pile driver hydraulic cylinder: the internal leakage of the pile driver hydraulic cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the pile driver hydraulic cylinder, so that the pile driver hydraulic cylinder can not accurately and stably stop in a certain position of the pile driver hydraulic cylinder, so it is one of the main indicators of the pile driver hydraulic cylinder.

pile driver hydraulic cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

When the pile driver hydraulic cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the pile driver hydraulic cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

The oil pile driver hydraulic cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.

Answers to some questions about pile driver hydraulic cylinder:

Why the injection cylinder retreating after the injection molding machine is started?
It is likely that the projected area of the molded plastic parts is large or the injection pressure set is relatively large, resulting in the expansion force exceeding the clamping force of the injection molding machine, so the mold is backward. You can do the following attempts: 1, reduce the injection force of the injection molding machine; 2, if the injection molding part can not be well formed by reducing the injection force, it is recommended to install the mold to a larger injection molding machine.

What does cylinder hob125*100 mean?
HOB is a series of hydraulic cylinder products, the use of pressure 14MPA, tie rod structure. 125 refers to the diameter of the cylinder and 100 refers to the stroke. The unit is millimeters.