This article mainly introduces:

Croatia hydraulic cylinder,pusher hydraulic cylinder manufacturer,pusher hydraulic cylinder

(Croatia pusher hydraulic cylinder,produced by Hebei Hengyu company）

pusher hydraulic cylinder are widely used in Croatia，because of no transmission clearance，smooth movement，long service life.So our company has designed pusher hydraulic cylinder for customers from Croatia.

Introduction to pusher hydraulic cylinder:

The pusher hydraulic cylinder should be used correctly and maintained regularly. The pusher hydraulic cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the pusher hydraulic cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

The pressure of the sliding surface of the pusher hydraulic cylinder piston is too large, resulting in sintering. The piston tilts due to the weight of the piston rod, resulting in the phenomenon of non-stiffness, or the pressure of the sliding surface of the piston rises due to the action of the transverse load, which will cause sintering. In the design of the pusher hydraulic cylinder must study its working conditions, the length of the piston and bushing and the size of the clearance must be fully paid attention to.

When the pusher hydraulic cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the pusher hydraulic cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil pusher hydraulic cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical pusher hydraulic cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the pusher hydraulic cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.

When the pusher hydraulic cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the pusher hydraulic cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

Answers to some questions about pusher hydraulic cylinder:

What is a differential cylinder?
The differential cylinder is by connecting the return oil of the rod cavity through the pipeline, allowing them to flow into the rodless cavity, thereby speeding up the extension speed of the piston rod. In fact, the cylinder is still the cylinder, but the oil circuit is related to the connection. The oil connection mode in which both chambers of a single rod hydraulic cylinder are fed hydraulic oil is called differential connection.

How big is the motor and oil pump for the 80 cylinder?
Pump motor selection is not only related to cylinder diameter but also speed system, it is recommended to provide system diagram and speed requirements, generally speaking, most of the 80 cylinder on the market is equipped with 3-4KW motor, 10-20 oil pump.