This article mainly introduces:

Austria hydraulic cylinder,pressure plate hydraulic cylinder manufacturer,pressure plate hydraulic cylinder

(Austria pressure plate hydraulic cylinder,produced by Hengyu Group）

pressure plate hydraulic cylinder are widely used in Austria，because of clever hydraulic energy conversion，high work efficiency，excellent fatigue and impact resistance.So our company has designed pressure plate hydraulic cylinder for customers from Austria.

Introduction to pressure plate hydraulic cylinder:

The pressure plate hydraulic cylinder body is commonly made of No. 20, 35, 45 seamless steel pipe, and the steel pipe is honed or rolled to achieve the roughness requirement within 0.4μm. The low pressure pressure plate hydraulic cylinder can use 20 steel pipe, and the high pressure pressure plate hydraulic cylinder can use 45 steel pipe.

Disassembly pressure plate hydraulic cylinder: When disassembly pressure plate hydraulic cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the pressure plate hydraulic cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the pressure plate hydraulic cylinder.

The pressure plate hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

How the cavitation of the pressure plate hydraulic cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the pressure plate hydraulic cylinder, resulting in corrosive damage to the parts.

Answers to some questions about pressure plate hydraulic cylinder:

Why are the hydraulic cylinders out of sync? The reasons for the unsynchronous operation are as follows: 1, the deviation of the external load of the two cylinders, such as the different resistance and friction of the two cylinders will lead to imbalance. The displacement of the cylinder with low resistance will be larger. 2, the difference in internal friction, such as the difference between the piston and the cylinder of each cylinder, the friction between the piston rod and the seal causes the cylinder to be out of sync. 3. The different resistance of hydraulic oil along the pipeline of the two cylinders causes the cylinder to be out of sync. 4, the deviation of the control original adjustment causes the deviation of the flow to be out of sync, such as the use of an independent throttle valve for each cylinder will appear the difference in the flow of oil in and out of the oil affecting the synchronization of the two cylinders. 5. The cylinder support point of the supported part is initially different.

What kind of seal ring we should choose for 120Mpa hydraulic cylinder?
The sealing rings used in mining machinery are high pressure, which can reach 150MPa. It is generally composed of three parts, the guide ring, the sealing body and the elastomer. It's not a special structure. It's more mature. Usually said mountain circle, bud circle.