This article mainly introduces:

Bulgaria yg series hydraulic cylinder,yg series hydraulic cylinder manufacturer

(Bulgaria yg series hydraulic cylinder,produced by Hebei Hengyu company）

yg series hydraulic cylinder are widely used in Bulgaria，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed yg series hydraulic cylinder for customers from Bulgaria.

Introduction to yg series hydraulic cylinder:

yg series hydraulic cylinder daily maintenance, should focus on checking whether the piston rod surface roughness and shape and position tolerance meet the technical requirements, if the piston rod bending should be calibrated to meet the requirements or according to the physical mapping, manufactured by a professional manufacturer. If the piston rod surface coating wear, slip damage, local spalling can be adopted to remove the coating, re-chrome surface processing process.

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular yg series hydraulic cylinder action. Troubleshooting method: Replace the rubber hose.

The definition of the minimum stable speed refers to the minimum movement speed of the yg series hydraulic cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the yg series hydraulic cylinder that undertakes different work has different requirements for the minimum stable speed.

There are some honeycomb holes in the inner wall of the yg series hydraulic cylinder, piston or piston rod surface. How is this formed? When we repair the yg series hydraulic cylinder, we can see that there are some honeycomb holes on the inner wall of the yg series hydraulic cylinder, the piston or the piston rod surface, which are caused by cavitation. Therefore, the cavitation of the yg series hydraulic cylinder is targeted to prevent. Is very necessary.

Answers to some questions about yg series hydraulic cylinder:

What material should be selected to seal the cylinder?
The choice of material for sealing is related to the working environment, strength, and medium of your equipment.

How to take out the diaphragm of hydraulic cylinder? The septum ring is also known as the septum sleeve, when the cylinder is too long, and does not need too much travel, add the septum sleeve, limit the stroke of the hydraulic cylinder, set on the piston rod, only contact with the guide sleeve and piston, do not cooperate with the cylinder, limit the stroke, take out the difficulty is different, need to have such a professional tool, before taking out to consult the manufacturer.