This article mainly introduces:

Uruguay hydraulic cylinder,supporting cylinder manufacturer,supporting cylinder

(Uruguay supporting cylinder,produced by Hebei Hengyu company）

supporting cylinder are widely used in Uruguay，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed supporting cylinder for customers from Uruguay.

Introduction to supporting cylinder:

When the supporting cylinder is in use, once the seal and guide support ring are found to be defective, the seal with the same structural form and appropriate material should be replaced according to the structural form of the supporting cylinder seal to be repaired, so as to minimize the thickness of the oil film between the seal and the sealing surface and reduce the leakage of the seal.

The definition of the minimum stable speed refers to the minimum movement speed of the supporting cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the supporting cylinder that undertakes different work has different requirements for the minimum stable speed.

Under normal circumstances, the supporting cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the supporting cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the supporting cylinder and the end cover, the piston and the piston rod, the piston and the supporting cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the supporting cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.

supporting cylinder piston rod material introduction: In general, we use 45 steel to produce supporting cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

Answers to some questions about supporting cylinder:

Why can't the hydraulic cylinder be pulled back after pushing to the limit?
May be long-term use to the limit position, resulting in serious wear caused! The solution is to add the stroke switch or disassemble and add gaskets before and after the piston.

What is the role of the cylinder on the plastic mold? The oil cylinder plays a great role in the mold, one is that the core distance is very large, or because of the mechanism of the product, only the oil cylinder is reasonable or more cost saving. Let the side core be extracted before opening the mold. Hot runner is mainly based on the product, sometimes customers require to use hot runner, the price is more expensive, but there are many benefits. It can save raw materials and shorten the molding cycle.