This article mainly introduces:

Bulgaria hydraulic cylinder,swager cylinder manufacturer,swager cylinder

(Bulgaria swager cylinder,produced by Hebei Hengyu company）

swager cylinder are widely used in Bulgaria，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed swager cylinder for customers from Bulgaria.

Introduction to swager cylinder:

swager cylinder installation precautions: Before installing the swager cylinder into the system, the parameters on the swager cylinder label should be compared with the parameters when ordering. The base of the swager cylinder must have sufficient stiffness, otherwise the swager cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.

If the piston rod and swager cylinder are stuck or the swager cylinder is blocked, at this time, no matter how to operate, the swager cylinder does not move or has little action. At this time, check whether the piston and piston rod seal is too tight, whether it enters the dirt and gum deposits: whether the shaft line of the piston rod and the swager cylinder is in the center, whether the wearing parts and seals are invalid, and whether the load is too large.

The body of the swager cylinder on the processing process requirements: the body of the swager cylinder is an important and essential part of the swager cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the swager cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

When purchasing the swager cylinder, try to clarify the following parameters of the swager cylinder: A. swager cylinder diameter, rod diameter, stroke; B. Working pressure or swager cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right swager cylinder type can be found accurately and quickly.

Answers to some questions about swager cylinder:

What is the valve on the hydraulic cylinder?
Oil valve, relief valve, overload valve, explosion-proof valve, etc., these are very convenient to insert! The oil valve, the overload valve and the blasting valve are very important for larger cylinders. Manufacturers will not offer you the selection. You need to choose the values by yourself according to your system, pump, cylinder, environment, working conditions and other comprehensive consideration!

How to set the stroke of the cylinder?
Self-design should be based on product demand and practical application. The stroke of standard cylinder depends on the parameters the customer requires. The hydraulic cylinder is a linear motion actuator whose output force is proportional to the effective area of the piston and the pressure difference on both sides. Its function is to convert hydraulic energy into mechanical energy. The input of the hydraulic cylinder is the flow rate and pressure of the fluid, and the output is the speed and force of the linear motion. The piston of the hydraulic cylinder can complete the linear reciprocating movement, and the linear displacement of the output is limited. Hydraulic cylinder is an energy conversion device that converts hydraulic energy into mechanical energy of reciprocating linear motion. The hydraulic cylinder is basically composed of cylinder body, cylinder head, piston and piston rod, sealing device, buffer device and exhaust device.